Estimate sand volume and approximate weight from project dimensions and material density.
Enable JavaScript to use the interactive calculator; the example and formula are described below.
Gravel, mulch, topsoil, sand, lawn and outdoor project material estimates.
Enter the values requested above and select Calculate. Change any input to compare another scenario. The calculation runs locally in your browser and does not require an account.
A 10×10-foot area filled 4 inches deep contains about 33.33 cubic feet of sand.
Estimate sand volume and approximate weight from project dimensions and material density. The result is intended for quick estimates, checking arithmetic and comparing scenarios. When a result affects a contract, tax filing, medical decision, building-code requirement or other high-stakes situation, verify the result with the appropriate professional or authoritative source.
For a 10-by-10-foot section filled 4 inches deep, the volume is about 1.23 cubic yards.
Convert inches to feet before multiplying dimensions for cubic feet.
Bulk sand density varies with moisture and material gradation, so weight estimates are approximate.
Related tools: Roofing Shingle Calculator · Siding Calculator
Estimate sand volume and approximate weight from project dimensions and material density.
Volume = length × width × depth. Estimated tons = cubic feet × density ÷ 2,000.
Yes. ERICH Calculators is free to use and does not require an account.
See how formulas, sources and limitations are handled across ERICH Calculators.