Estimate grout volume from tile size, joint width, joint depth and tiled area.
Enable JavaScript to use the interactive calculator; the example and formula are described below.
Concrete volume, slabs, footings, blocks, bricks, pavers and related material quantities.
Enter the values requested above and select Calculate. Change any input to compare another scenario. The calculation runs locally in your browser and does not require an account.
Narrow joints around large tiles use much less grout than wide joints around small tiles.
Estimate grout volume from tile size, joint width, joint depth and tiled area. The result is intended for quick estimates, checking arithmetic and comparing scenarios. When a result affects a contract, tax filing, medical decision, building-code requirement or other high-stakes situation, verify the result with the appropriate professional or authoritative source.
A 200-square-foot tile job with 12-inch square tiles, 1/8-inch joints and 1/4-inch joint depth gives an estimated grout volume.
Wider or deeper joints require more grout even if floor area stays the same.
Tile edge profiles, actual joint depth, spillage, and manufacturer yields affect bag counts.
Related tools: Gravel Calculator · Lawn Size Calculator
Estimate grout volume from tile size, joint width, joint depth and tiled area.
Approximate grout fraction is based on the joint cross-sectional area relative to a repeating tile module; the result is converted to volume.
Yes. ERICH Calculators is free to use and does not require an account.
See how formulas, sources and limitations are handled across ERICH Calculators.